There are several reasons why you might need to re-connect your Airtame to a WiFi network:
You are unable to access the device settings.
The name of your network has changed (SSID).
You move the Airtame to a different location.
You are taking the Airtame for a remote presentation.
In these cases, you will have to access the device settings and update the WiFi network. If you don't want to connect the device to a network, you can also make use of it by connecting to the Airtame's own Access Point.
Method 1
Option A:
Open the available WiFi list on your computer.
Connect to the WiFi with the same as the Airtame.
Open the Airtame application.
The name of your Airtame should appear on the list.
Hover the mouse over the device's name to click the Settings options.
Scroll down to the Network section.
Select the WiFi network and insert the password.
Click on Apply Changes.
Option B:
Open the Airtame application.
The name of your Airtame should appear on the list.
Hover the mouse over the device's name to click the Settings options.
Scroll down to the Network section.
- In the Network options, click on Forget network.
- Select the WiFi you want Airtame to be connected to.
Click on Apply Changes.
Note: If the device's hotspot is not visible on your computer's list of available WiFi connections, you can reactivate the hotspot by holding the button on the device for 3 seconds - the LED light will turn orange.
Method 2
Reset the Airtame device and set it up again with the new WiFi settings: