The Access Point (AP) feature on Airtame devices allows users to connect directly to the device for screen sharing and network access. However, for optimal security and functionality, proper configuration is essential. This article will guide you on setting up and managing the AP, with a focus on password protection, network settings, and WiFi forwarding.
Key Considerations for AP Configuration
-
Enable Password Protection:
-
Adding a password to your AP is highly recommended during setup. Leaving the AP unprotected poses a security risk, as unauthorized users could access your internal network via the Airtame device.
-
A password-protected AP is also a requirement for using Miracast peer-to-peer. For detailed steps on configuring Miracast, refer to our dedicated Miracast article.
-
-
Disable AP if Unnecessary:
-
If you do not need the AP feature, consider disabling it entirely to eliminate potential security risks.
-
To disable the AP, turn off both the 2.4 GHz and 5 GHz toggles in the network settings.
-
How to Edit Network Settings
Follow these steps to adjust your Airtame device's network settings, including toggling the AP, enabling WiFi forwarding, and setting a password:
-
Open your Airtame Cloud account.
-
Select the device(s) you want to configure.
-
Click the Edit Settings button.
-
Navigate to the Network menu.
From here, you can:
-
Toggle the AP on or off by controlling the 2.4 GHz and 5 GHz settings.
-
Define a password for the AP.
-
Enable or disable WiFi forwarding.
Customizing Access Point Settings
The AP settings now include the following toggles:
-
2.4 GHz Band: Enable or disable the AP on the 2.4 GHz frequency.
-
5 GHz Band: Enable or disable the AP on the 5 GHz frequency.
-
WiFi-Forwarding: Allow devices connected to the AP to access the internet through the Airtame device.
To disable the AP entirely, ensure both the 2.4 GHz and 5 GHz toggles are turned off.
WiFi-Forwarding
WiFi-forwarding allows devices connected to the Airtame AP to access the internet by forwarding traffic through the primary network. This feature is useful for scenarios where internet access is required for connected devices. However, enabling this feature could increase security risks, so use it cautiously and ensure that AP password protection is enabled.
Security Reminder
Leaving the AP on without a password creates a vulnerability, as unauthorized users could gain access to your internal network through the Airtame device. Always enable password protection or disable the AP if it is not needed.
By following these steps and recommendations, you can ensure that your Airtame device’s AP is configured securely and effectively for your needs.