Skip to main content

How to physically install Airtame Hub

  • Updated

What you need for set up:

  • Airtame Hub and the accessories that come with the box.
  • A big display to be used as the Airtame screen.
  • A laptop running Windows, macOS, or Linux.
  • RJ45/Ethernet cable for network and/or power. We recommend CAT 5e or higher for PoE+.  Power delivered must be between 46-57V and a maximum of 30W.  
    • If PoE+ is not available for power, you must purchase a DC power adapter (12 V/55 W max) which can be found here under part number AT-CD1-PSU 
  • Optional:
    • Camera, Speaker, and Microphone, all with USB outputs, for video conferencing.
    • 4mm hex key, if you want to lock the device on the wall.
    • Screwdriver or a drill, if you want to mount the device’s plate on the wall.

Step 1: Select the location

  • Make sure all peripheral, power, ethernet, and screen cables can reach the Airtame hub.

Screen_Shot_2022-06-01_at_12.57.27.png

Step 2: Mount the Mounting Plate

The mounting plate can either be connected to a wall using screws or double-sided tape. Alternatively, it can be placed on a flat surface with the 4 rubber feet on the mounting plate.

Screwing the mounting plate

Remove the mounting plate from the Airtame Hub

The mounting plate is held in place with magnets.

  • Push down on the end of the Mounting Plate by the label to pivot it and remove it from the Airtame Hub.

Screen_Shot_2022-06-01_at_12.51.28.png

Mounting the mounting plate

  • Drill holes in the selected location for Wall Plugs.

Screen_Shot_2022-06-01_at_13.01.39.png

  • Drill holes in the selected location for Wall Plugs. Insert Wall Plugs in the holes, and fix the Mounting Plate using the Screws (which can be found in the Accessory Kit).

Sticking the mounting plate using command strips

  • Make sure the wall is clean and dust-free.
  • Place the included 3M adhesive command strips on the mounting plate.
  • Remove the blue foil from the command strips and press the mounting plate against the wall.

Screen_Shot_2022-06-01_at_13.04.23.png

Mounting the Airtame Hub on a flat surface

  • Set the Airtame Hub on a flat surface

Screen_Shot_2022-06-01_at_13.04.33.png

Step 3: Connect cables to Airtame Hub

  • Connect the HDMI 1.4 port.
    • the second HDMI port is disabled at the moment, so make sure to connect to the right HDMI port.
  • Connect the Ethernet cable to the PoE+ port to power the Airtame Hub.
    • if your network environment does not allow PoE+, you will need to purchase a separate AC power adapter to power your device. You can find the Hub AC power adapter for purchase on our accessories page. 
  • Optionally: If you plan to use the Airtame Hub for video conferencing, connect the camera, microphone, and speaker to the USB port.

Screen_Shot_2022-06-01_at_13.07.01.png

Step 4: Place Airtame Hub

  • Attach the Airtame Hub to the mounting plate. The magnets will keep it in place.
  • Optional: You can lock the Airtame Hub to the Mounting Plate with a 4 mm hex key.

 

Screen_Shot_2022-06-01_at_13.09.10.png

Ready to continue your set-up? Configure Airtame Hub for the first time

 

 

Related articles