All MAC addresses can be found by opening "Airtame settings" from within the Airtame app or via Airtame Cloud or on the sticker on the Airtame ethernet adapter. Airtame 2 Mac address can be found on the packaging as well.

Airtame 2 Mac address

Airtame 2, because of the different chip, uses only 1 Mac address for all its network interfaces. You can find it on the packaging or on the bottom of the device (under Magnetic Wall Mount).
In case you use Ethernet adapter - separate Mac address will need to be used. It can be found on the sticker on the adapter itself.

Airtame 1 Mac addresses

Airtame 1 has MAC addresses for both it's 2.4 GHz and 5 GHz WiFi and the ethernet connection, in case you use an Ethernet adapter. When using MAC addresses to set a static IP, you'll need to use the MAC address of the interface connecting to your network, for example, if your Airtame is connected to your network using its 5GHz WiFi, then you'll need to make your IP reservation using the MAC address for the 5GHz WiFi. 

Inside The Airtame App

We can see the MAC address listed under the options to enable each WiFi as a hotspot. You can identify which one is connected to a network because the toggle to turn it on as a hotspot is grayed out.

Inside Airtame.cloud

You can tell which WiFi is being used because its on/off switch will be grayed out. This is because it cannot be enabled as a hotspot when it is already being used to connect to a network

Did this answer your question?