Device specifications

Hardware

  • Linux
  • Ram: 2 x 256Mb
  • Processor: Freescale 1Ghz ARM

Screen connections: 

  • HDMI / VGA* / DVI*  (*With Adapter)

Output resolutions: 

  • 1920 x 1080 (up to 60Hz)
  • 1280 x 720   (up to 60Hz)

Audio

  • Stereo 192Kb (48.000Hz)

Frame rate

  • 1080 @ 30fps / 720 @ 60fps

Input resolutions

  • Up to 4K. Scaled to Full-HD

Wireless 

  • IEEE 802.11a/b/g/n WPA2-PSK/EAP/PEAP/AES/TKIP
  • 2.4GHz & 5GHz

Supported Network Security:

Wireless reach

  • Max 10m* (30 ft). *Dependant on environment

Connections

  • 1 Micro USB host port (Ethernet*)
  • 1 Micro USB OTG power port
  • *Ethernet to micro-USB adaptor sold separately 

Temperature range

  • -40 to +80 storage
  • +5 to +40 operating

Lifetime

  • MTBF = 40,000h (Confidence level = 85%)

Dimensions

  • L: 76.88mm
  • W: 40.91mm
  • H: 14.30mm

Warranty

  • Limited min 1 year* standard. *Some regions may vary

  

System Requirements

The Airtame app can be installed or run as a portable app (Windows Guest app)

Supported Operating systems

  • Windows 7/8/8.1/10 (32 & 64 bit)
  • Mac OS 10.9/10.10/10.11/10.12 (64 bit)
  • Linux Ubuntu 14.04/18.04
  • Chrome OS 63/64 (more on what Chromebooks are supported read here)
  • Android 4.1 and above
  • iOS 7/8/9/10/11

System Minimum

  • Dual core 1.6GHz CPU
  • 2GB Ram
  • 802.11g WiFi

System Recommended

  • Dual Core 2.8GHz CPU
  • 4GB RAM
  • 802.11n/ac

Network minimum

  • 2.4GHz 802.11n (-50dbm)
  • 5GHz 802.11n/ac (-60dbm)
  • MIMO 2x2

Display

  • HD 720 Display
  • HDMI/VGA/DVI Input

Not Supported:

  • Blackberry
  • Windows Phone
  • ARM based PCs. (Like Surface RT)

 

Room Checklist

  • 1080p flat-panel or Projector with a free HDMI port
  • Power for Airtame from either a 1Amp USB port in the screen or AC plug nearby for the following AC Adapter.
  • Supported Device: Windows, macOS, Linux, iOS, Android, Chromebook 

👆 Chromebooks with ARM processors is currently not supported

 

Recommendations for Using Airtame

Display:

  • Full-HD 1080p Display
  • USB port with 1Amp of power
  • HDMI Input

Computer:

  • Windows 10 - OS 10.11 - Linux 15.04
  • CPU: Intel i series or AMD FX/Phenom 2GHz
  • RAM: 4GB
  • WiFi: 802.11 a/n/ac

Network:

  • 5GHz 802.11/n
  • RSSI -40dBm to -60dBm
  • Ping times stable and below 20ms from the streaming devices

Learn to diagnose your network

We recommend using an Ethernet connection whenever possible to ensure the best streaming performance: How to use an ethernet adapter

Network checklist:

Since both the performance and stability of Airtame rely on the network connection we can't guarantee it's correct working if these recommendations are not followed:

  • WiFi AP/Router supporting 5GHz 802.11n/ac placed without any major blocking obstacles between it and Airtame location
  • A wired network connection using an ethernet adapter. How to use an ethernet adapter

If Airtame is about to be installed in locations with low WiFi signal strength connecting directly to the Airtame WiFi network can resolve this issue. Please note that this might cause a potential security breach or block access to internal services, so please reach out to the IT administrator for advice. 

  

 👉 Learn more

Did this answer your question?