There are a few reasons why you may be seeing a black screen, here we will cover most common ones and how to correct them:

  1. "No Signal" or black screen when the device is turned on
  2. Device doesn't turn on or does not show any light
  3. Virtual Machine (VM) or Windows server using RDP
  4. Constantly spinning arrows
  5. Computer with discrete GPU
  6. HDCP/DRM Copyright Protection
  7. HDCP protection on the switch

1. "No signal" or black screen when the device is turned on

This may just be that the device is taking a little longer than usual to boot up. Wait for 30-60 seconds for the picture to show.
If it doesn't show, please try another HDMI port on the screen.

If that doesn't help then follow these steps:

Airtame 2

OPTION 1:

Could you please try the following steps in the exact order:

  • Turn off the TV,
  • Unplug the device from the HDMI port and power,
  • Wait 30 seconds
  • Turn on the display screen
  • Plug the device into the HDMI port
  • Plug the device into power using the AC adapter through a wall socket.
  • Give the device sometime to power up.

After that, please follow these steps:

  1. Open the Airtame app.
  2. Find the device.
  3. Hover over the name of the device to access Settings.
  4. Scroll to the bottom and click on Advanced Settings.
  5. Go to the Resolution section.
  6. Select the highest available resolution from the list, which should be 1920 x 1080 @ 60 Hz (Preferred/P).
  7. If this specific resolution doesn't help, please try some other resolution options from the list, that might match the resolution of the display.

Sometimes subtle changes make a big difference e.g. 1920x1080 @60Hz vs. 1920x1080 @50Hz where only one supports video/audio. It might take some trial and error of choosing a manual resolution.

OPTION 2:

If option 1 does not prove helpful, could you please try to unplug the USB-C Aircord, flip it over 180 degrees and plug it back in. This will reboot the Airtame and hopefully allow the EDID handshake to complete normally. Do you see an image on the screen? Here’s a reference on which part of the cord to flip:


OPTION 3:
Do you have any other Airtame 2 devices? If so, please take the Aircord from another Airtame device and plug it into this Airtame device that is not displaying an image. Does the Airtame display an image now, with the new Aircord?

Airtame 1

Let's first check if the Airtame 1 is still visible to your Airtame application.

When you open the Airtame application, does your Airtame show?

You can also check your computer's WiFi list for the Airtame's own SSID (same name as the Airtame device).

Option 1 - Airtame is not visible

If you cannot access the Airtame settings let's first try a factory reset using these instructions.

If that is unsuccessful, you can also attempt a manual flash of the SD card inside the Airtame 1 unit using a SD card reader. This could overwrite any corruption to the firmware image stored on the SD card.

If your Airtame remains unreachable, please use the white and blue chat icon in the lower right to contact our support team.

Option 2 - Airtame is visible

Could you please try the following steps in the exact order:

  • Turn off the TV,
  • Unplug the device from the HDMI port and power,
  • Wait 30 seconds
  • Turn on the display screen
  • Plug the device into the HDMI port
  • Plug the device into power using the AC adapter through a wall socket.
  • Give the device sometime to power up.

After that, please follow these steps:

  1. Open the Airtame app.
  2. Find the device.
  3. Hover over the name of the device to access Settings.
  4. Scroll to the bottom and click on Advanced Settings.
  5. Go to the Resolution section.
  6. Select the highest available resolution from the list, which should be 1920 x 1080 @ 60 Hz (Preferred/P).
  7. If this specific resolution doesn't help, please try some other resolution options from the list, that might match the resolution of the display.

Sometimes subtle changes make a big difference e.g. 1920x1080 @60Hz vs. 1920x1080 @50Hz where only one supports video/audio. It might take some trial and error of choosing a manual resolution.

2. The device doesn't turn on or does not show any light

Airtame 2

If your Airtame 2 device is not turning on and is not showing a light, please make sure that the device is properly powered.

  • Airtame 2 is powered by a : 2.3A @ 5V power adaptor (included).
  • We recommend using the provided power adaptor. Airtame 2 cannot be powered via USB port of at TV or Projector.
  • The Aircord is not compatible with any USB extenders and, if necessary, should only be extended on the Power-side using Airtame Extension Cord.

When powered up correct, Airtame 2 will display a green LED light.

If you are powering the Airtame 2 device correctly, but there is no light on the device please try and replace the Aircord or a power adapter with one from another Airtame 2 device. Does the device power on with another Aircord/power adapter?

If you don't have other Airtame 2 devices to swap the Aircord or power adapter, please reach out to us on chat by clicking on the white blue icon in the right bottom corner.

Airtame 1

If your Airtame 1 device is showing no light, please try the following steps: Try a different USB cable

  1. Make sure that the device is plugged into a USB power source with 1 Amp of power. Maybe try some different USB ports on the TV. "Service" USB ports will not work.
  2. Make sure that the power cable is plugged into the correct port, that is the port on the left edge of the device towards the letter A of the word "Airtame" printed on the device.
  3. Try the power adapter included in the box or a power adapter from another Airtame 1 device.
  4. Peel off the back casing of the device and check that the SD card is placed correctly and that the frame is locked into place.

    Note: If you have a working Airtame 1 device, try to switch the microSD cards between them - let us know if switching the microSD card helps.

  5. Try re-flashing the firmware to your device. Windows / OS X
  6. Shake the device to see if you can hear rattling. If it is rattling check to see if the USB plug has come loose.

3. Virtual Machine (VM) or Windows server using RDP

Users running Airtame on a Virtual machine or a server without a dedicated monitor may experience the stream showing a black screen or just a mouse pointer. This is because the Airtame app doesn't have a screen to capture from. Your options are:

  1. Use VNC over RDP as it creates a virtual screen to capture from.
  2. Use a Headless Dongle to simulate a screen being attached.
  3. Attach a monitor to the server.
     

4. Constantly spinning arrows

Symptom 1:
When starting a stream from a computer, you see spinning arrows indefinitely and the stream never starts.

Solution: The Airtame app is having trouble capturing your screen. This is most likely due to your computer rendering the screen on a graphics card instead of the main GPU. Try to access your graphics settings and see if you can set for Airtame app to capture from "Integrated graphics" or "Internal graphics".

Symptom 2:
Instead of displaying a digital signage app - Airtame shows spinning arrows

Solution: This means device can not load the digital signage content. The issue could be that website or image is very big and therefore process takes too long. Try to use different image or website.  

5. Computer with discrete GPU

Symptom: You start a stream and one of the following occurs:

  1. All you see is a black screen.
  2. You see your stream but when going into full-screen mode you see a black screen.
  3. You see black boxes covering sections of the screen.

Solution: Your computer is switching its graphics processing from the built-in GPU to the discrete GPU and Airtame application doesn't switch where it is capturing from. Go into your graphics card configuration panel inside "Control panel" or the designated app and set the preferred graphics processor to "Auto-Select".

If it already was at "Auto-Select" and the problem persists, check for an extra tab/section that lets you configure that option per application.
Add the the Airtame application and choose "Integrated Graphics" (not Auto Select).
 

6. HDCP/DRM Copyright Protection

Symptoms: When watching some content on your computer (Netflix, iTunes Movie, Amazon Prime...) your stream disappears and shows a black screen, you may continue hearing the audio from the content.

Solution: Not all browsers detect DRM so using a different web browser can allow for it to be streamed but some services running in their own app like iTunes are unavoidable and cannot be worked-around.

7. HDCP protection on the switch

Some HDMI switches have HDCP content protection enabled in order to prevent image from being illegally captured and sent. To use Airtame with such a switch - you would need to disable HDCP protection on the switch controller. 

For Crestron switches the procedure is like this:

DMPS3-300 Units:

If you go into DMPS Tool in Toolbox, you will see a tab for Input Configuration. This will allow you to change certain parameters for each input. One of them is a checkbox for HDCP Support. Uncheck this and it disable HDCP on the selected input. After that, unplug the HDMI cable from the input, reboot the Airtame, and wait for it to restart. When it’s finished, plug the HDMI cable back into the input.

DMPS3-4K-150 Units (these are a little different):

Open up a web browser and type in the IP address followed by /setup/ Ex. x.x.x.x/setup/ After accessing the page, click the hamburger menu in the top-right and select the Main option. Then, select the desired input and uncheck the box labeled HDCP Support. After that, unplug the HDMI cable from the input, reboot the Airtame, and wait for it to restart. When it’s finished, plug the HDMI cable back into the input.

Do you have any questions?

You can write to us using the blue chat box in the lower right hand corner or send an email to support@airtame.com and we will be here to assist you.


If you are facing technical issues, remember to include Airtame device logs in your message.

Sign up for product updates to stay posted on future features.

Did this answer your question?